Call us at (661) 257-4060

MG-Logo-325

Granatex solid surface filler products are now
Marshall Gruber Company product.

View Granatex products on the
Marshall Gruber website at

http://marshallgruber.com

These products continue to be available
from Gruber Systems as well.
Products | Supplies | Tooling Clay/Wax
Tooling Wax, Clay and Accessories Print
  • Tooling Clay and Wax
  • Wax and Clay Tools and Accessories (Scribing Tools, Shapers, Waxing Tools)

  • See our Clay and Wax Extruders here

     

EX-Wax™ Extrudable Tooling Wax

  • Use Hard Clay when operating in a warm environment or during the hot season.
  • Use Soft Tooling Clay in colder temperatures or environments.

This well-known Extrudable Wax material from Gruber offers the best characteristics of both fillet wax and modeling clay. EX-Wax leaves a smooth radius, doesn’t contain solvents, tools easily, and is extrudable. Offered in box quantities only, which is 12 sticks, and weighs a total of 2 lbs.

Manufacturers have reported much success in using EX-Wax as their radius material, particularly during hot summer months when clay use becomes difficult. In high temperatures, solvent, the ingredient in clay that makes it workable, becomes more active and can cause headaches such as the breakdown of release wax on the mold's surface and the inability of the clay to properly hold its shape during casting. Since EX-Wax is "solvent-free", problems in your plant relating to "gelcoat lift", "pre-release", and finished part appearance, are greatly reduced. EX-Wax is available in two formulations (soft and hard) based on the season during which it will be used, so please specify when ordering.

EX-Wax can be applied without heat, and extruded through our Clay (or Wax) Extruders. Use an Extruder to quickly create perfectly formed strands of EX-Wax radius material. To use Clay Extruders, you must select at least one size of Wax Extruder Tubes as well. These tubes are available for use with either the Pneumatic Clay Extruder or our Manual Clay Extruder model.

 

ExWax-250

Available variants of this product include:
 
Soft:
Box/12 Sticks - #02213
Case/12 Boxes - #02214
 
Hard:
Box/12 Sticks - #02215
Case/12 Boxes - #02216
 
 
 

 
 
 
 


Tooling Clay

Tooling Clay is used for the same purposes as EX-Wax and Tooling Wax - to create a smooth radius between the edge of a floating bowl mold and the surface of the vanity deck on which it is positioned. Like EX-Wax, no special applicator tools or heat are required in its use. The clay can be extruded in the size required through the Gruber Clay Extruder.  Packaged in 20 stick, 5 lb. boxes of individually wrapped 4 oz sticks.

 

SoftToolingClay550

Soft Tooling Clay:

 
Order Information
5 Lb Box -
#02209A (shown at right)
 
 
 
 
 

 

 

HardToolClay500Hard Tooling Clay:

Note: Also referred to as Firm Tooling Clay since it is firmer/harder than the soft tooling clay shown above.

 
Order Information
5 Lb Box - #02209H (shown at right)
 
 
 
 

 

 

 

 


Tooling Wax

Tooling Wax is used to create a smooth radius between the edge of a floating bowl mold and the surface of the vanity deck on which it is positioned. Available in a 1 lb roll, 2 lb boxes. Also called Strip Wax, Fillet Wax, Tooling Wax and other names.

 

filletwax-closeupGruber Wax Fillets - Rolls (Continuous Roll Form)

Gruber Wax Fillets are made of a performance-proven, high melting point wax formulation for meeting a wide variety of pattern shop applications.

  • Are easily applied to straight or irregularly shaped surfaces because of their flexibility.
  • Produce and maintain accurate radii regardless of application conditions.
  • Can be applied to bare wood or coated surfaces without the use of an adhesive by using a heated fillet tool.
  • Are available in 1¼ 2 lb. rolls and 2 lb. boxes (24" straight pieces).

 

Filletwax-boxGruber Wax Fillets - Boxes (24" length strips)

Gruber Wax Fillets are made of a performance-proven, high melting point wax formulation for meeting a wide variety of pattern shop applications.

  • Are easily applied to straight or irregularly shaped surfaces because of their flexibility.
  • Produce and maintain accurate radii regardless of application conditions.
  • Are available in 1¼ 2 lb. rolls and 2 lb. boxes (24" straight pieces).

 

#1 Tooling Wax - 1/16” Diameter Bead

2 lb Roll - #01038
2 lb Roll - #01038

 

#2 Tooling Wax - 1/8” Diameter Bead

01039-SM1 lb Roll - #01039

 

 

 

 

 

 

01040-SM2 lb Box - #01040

 

 

 

 

 

#3 Tooling Wax - 3/16" Diameter Bead

01042-SM1 lb Roll - #01041
20 lb Case of 20 (1 lb) Rolls - #010420
2 lb Box - #01042
 
 
 

 

 


Clay/Wax Extruders

pneuclayextrueextruderM-300The Gruber Pneumatic or Manual Clay Extruder offers a convenient way to quickly create an exacting bead of wax or clay for mold setup. See more detailed information on Clay/Wax Extruders here.
 


 
 
 
 
 
 
 
 
 
 
 


Waxing Tools

wax-shapers550

Wax (and Clay) Radius Tools

Quickly create a smooth, clean wax radius with these handy, simple hand tools that work well and reduce fatigue.

Order Information
#1 (1/4 - 1/8 Radius) - Each - #01031
#2 (1/2 - 3/8 Radius) - Each - #01032
#3 (3/4 - 5/8 Radius) - Each - #01033

 

 

 

 

 

 

Tags: Ex-Wax, Ex Wax, X-Wax, X Wax, Xtrudable Wax, Scribing, Wax Shapers, Waxing Tools