Call us at (661) 257-4060

Mold Strippers and Cleaners Print
Gruber offers two basic categories of Mold Strippers and Cleaners
  • Our original GruberCare Mold Care products for use with Wax-based Mold Release systems

  • GruberCare™ MR Series for polymer-based mold release systems


Click on the links below for detailed information about each product.

GruberCare MR Strippers and Cleaners for polymer-based mold release

Designed for stripping and cleaning of polymer-based release systems.

MR1404-sm


NEW! GruberCare™ MR Stripper CA

Polymer Release Agent Remover for Composites Applications!

  • Remove dirt, grease, and contaminants from a mold surface.
  • Particularly efficient at removing silicone, wax or other types of buildup on a mold surface
  • Designed to not soften or dull mold materials
  • Best on the market
  • Use on any metallic or thermoset mold.

NOTICE: This product is not to be supplied, sold or offered for sale within the State of California, and especially not within the jurisdiction of the South Coast Air Quality Management District (SCAQMD)


MR1404-sm

GruberCare™ MR Cleaner CA

GruberCare™ MR Cleaner CA Polymer Release Agent-Cleaner and Restorer is blend of organic solvents designed to remove dirt, grease and contaminants from a mold surface. The GruberCare MR Cleaner CA is particularly efficient at removing silicone, wax or other types of buildup on the mold. GruberCare MR Cleaner CA is designed not to soften or dull mold materials (such as GRP). Consequently, GruberCare MR Cleaner CA can be used on any metallic or thermo set mold. GruberCare Cleaner CA should be used immediately prior to the application of GruberCare MR Sealer CA or other Release Agents.


MR0804-SM

GruberCare MR Solvent Cleaner

This product is intended to be used to clean residues left behind by clays and waxes used during the curing processes. The oily type residue left after exotherm will contribute to streaking and hazinc of the mold surface. This solvent is intended to remove these type of residues, while not removing all of the release agent polymer.

NOTICE: This product is not to be supplied, sold or offered for sale within the State of California, and especially not within the jurisdiction of the South Coast Air Quality Management District (SCAQMD)


MR0405-sm

MR0504-sm

GruberCare MR Wet-Strip™ Mold Cleaning System

  • Wetstrip Cleaner
  • Wetstrip Rinse

Designed for: Thorough cleaning of all mold finishing compounds, including wax based release systems, and substantial removal of polymer based release systems. Excellent for surface preparation prior to application of polymer or waxed based releases.

Benefits:
• Ecological - all water based, biodegradable.
• Labor saving - cleans faster than solvent wiping.
• More effective - better porosity cleansing of polishing compounds.

Not designed for: Dissolving styrene buildup, green wax crystallization or other process contamination. WetStrip replaces the use of harsh solvent cleaning after new mold building or maintenance processes.


GruberCare Strippers and Cleaners for Wax-based Mold Release

Designed for maintaining wax-based mold release products, and includes wax cleaners, sealers, strippers and wax-based mold release agents.
010614-SM

GruberCare Stripper

Formulated especially for stripping wax and other residuals from cultured marble and other fiberglass mold surfaces
GruberCare Stripper is a liquid blend of mild solvents and a high melting-point wax designed to dissolve and assist in the removal of wax build-up, overspray and buffing compound residuals. The trace of high melting-point wax assures that the mold surface is never completely stripped to the "dry" or "etched" condition that commonly occurs with acetone, Methylene Chloride or Ethyl Acetate. Its also eliminates mold streaking that occurs with other strippers.


010660-sm

GruberCare 210-GC Stripper

GruberCare 210-GC Stripper is a liquid blend of mild solvents and a high-melting point wax designed to dissolve and assist in the removal of wax build-up, overspray and buffing compound residuals. The trace of high-melting-point wax assures that the mold surface is never completely stripped to the "dry or etched" condition that commonly occurs with acetone, Methylene Chloride or Ethyl Acetate. It also eliminates mold streaking that occurs with other strippers.