|Window Sill Molds/Corniced Window Sill Molds|
Window sill molds have a variety of uses for as trim for windows, fireplaces and other uses, as well as a backsplash for countertop applications..
Standard (Straight Edge) Window Sill Molds
3/4” Sill Molds, 3-Cavity
* previously was 66943. Use 22721 instead.
3/4” Sill Molds, 4-Cavity
3/4” Sill Molds, 6-Cavity
Corniced Edge Window Sill Molds
Cornice Window Sill molds feature a corniced edge treatment (shown at left). Whether it be a window sill, a fireplace mantel, or a bookcase shelf, you can cast beautifully contoured corniced leading edge sills.
Cornice Sill molds are available in a variety of lengths and depths:
Note: These male molds can be cast quite easily without use of a female, so a female is not offered for the Corniced Window Sill molds. To cast, pour the main mold volume normally, let it kick, then lay the mold on its side (its built to accommodate that), and finish pouring the front lip.
Note: Available in both MetaMold or Vinyl Ester construction. To order as a MetaMold mold, add an "M" to the end of the part number listed above. To order as a Vinyl Ester mold, at a "V" to the end of the part number shown above. Learn the difference.
End Stop Dividers for Corniced Sill Molds
Special End-Stop Dividers are available for blocking the mold down to any desired length. End Stop Dividers for the Corniced Sill Molds shown above are ordered based on the depth of the mold - either 5", 10", 12" or 24". For any corniced sill mold divider deeper than 24", please contact your Gruber representative.
FOR 5" DEEP CORNICED SILL MOLDS (#228185 and #2281851)
FOR 10" DEEP CORNICED SILL MOLDS (#228181, #22818, #228180, #228182, and #228183)
FOR 12" DEEP CORNICED SILL MOLDS (#22874)
FOR 24" DEEP CORNICED SILL MOLDS (#22873)