Call us at (661) 257-4060

Products | Equipment | Tunnels/Booths/Rooms | Post Cure Room
Post Cure Heat Room Print

The Post Cure Heat Room is designed to accelerate the complete polymerization (curing) of solid surface panels prior to finishing.

  • New 90" interior clearance
  • 13'L x 90"W x 114"H (interior LWH)
  • Eight (8) conveyor levels in standard configuration, option to reduce
  • Various door and/or conveyor level options available - call for more information
PostCureRoom325
                             

Application:
The Post Cure Heat Room is designed to accelerate the complete polymerization (curing) of solid surface panels prior to finishing. Curing cast product with the Post Cure Heat Room helps to create a much stronger and durable (post-cured) cast product, and can avoid warpage and other issues associated with insufficiently cured parts.

Description:
The Post Cure Heat Room features heavy-duty sheet metal shells with 2" thick thermal insulation, heavy duty steel frame, 3-phase electric heater, 3-phase 50/60 hertz recirculating blower with ducting, counter balanced manually operated door assemblies, and up to eight levels of 11-gauge galvanized steel wheel way assemblies with zinc plated steel skate wheel bearings.

Product Range:

  • Post Cure Heat Room 90"W, Double-Wide, 8-Level, Doors 1 End, 13'L x 90"W x 114"H (interior LWH), Crated - #0831191-90

Note:  Other combinations of levels and doors are available upon request. Call for special or different configurations.

 


MORE INFORMATION

Specifications:

Frame: Height: 32" (to top of posts), 153" (to top of heater)
  Width:

90" Interior Clearance

  Length: 156” (13 ft.)
Wheel way, left, right, and middle: Width: 20-1/8" (wheel center to wheel center)
  Height: 28" (bottom level)
Electrical: Heater 21kw (72,000btu) 230/460VAC, 3-phase, 60hz @ 52/26 Amps
  Control: 24v remote bulb thermostat
  Recirculating Blower 230/460VAC, 3 phase, 60hz @ 9.6/4.8A
Capacity:   6600 CFM @ 1/8" static pressure

Equipment Requirements:
Post cure rooms should be hardwired to an appropriate circuit by a qualified electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed to deem this equipment operational will be obtained by buyer at buyers expense.