|Pneumatic Powder Pump|
Now, use a single Ground Hopper to supply lightweight fillers (including ATH) to two different Autocaster or Batchmaster machines.
Up to now, each metering hopper on your Autocaster casting machine or your Batchmaster metering system required its own Ground Hopper if you wanted automated bulk filler supply to the metering hoppers.
Now, with Gruber’s new Pneumatic Powder Pump System, a single Ground Hopper or Silo can supply powder to up to two different Autocaster or Batchmaster metering hoppers.
Shown at left:
The powder pump can be configured as a single direct air transport system to transport powder to a single Autocaster or Batchmaster, or when equipped with the dual-valve configuration shown above, it can supply powder to two different metering hoppers located on two separate Autocaster and/or Batchmaster machines.
Pneumatic powder transportation over distance provides more flexibility in placement of your Ground Hopper, to reclaim valuable space near the heart of your casting station where the Ground Hopper would normally reside.
By using the dual valve configuration, this pump will then deliver powder to two machines from a single Ground Hopper - thus freeing up valuable space near your casting station by eliminating a Ground Hopper.
Offered in a variety of configurations:
Ground Hopper, complete, equipped with Pneumatic Powder Pump
Recommended when you need a Ground Hopper and want to move the Ground Hopper further from the Autocaster and/.or Batchmaster systems than an auger-driven Ground Hopper can offer.
Ground Hopper, complete, equipped with Pneumatic Powder Pump and Two Way Valve
Retrofit an existing Ground Hopper with Powder Pump
Retrofit an existing Ground Hopper with Powder PumpConverts an existing Powder Ground Hopper, replacing the Auger drive with the Pneumatic Powder Pump including dual switching valve, to enable longer distance, remote powder transport to two metering hoppers on an Autocasters and/or Batchmasters through a transport tube.