Autocaster RC PLC CPU
Own an Autocaster RC?
Avoid a potential "multi-day down" disaster because of old PLC CPU failure
Replace your old unit with a new modern PLC CPU BEFORE the old one dies.
Long lasting protection against dust, scratches and gouges.
Keep your touchscreen looking like new
Abrasion and chemical-resistant to protect the LCD screen - now remove matrix with acetone!
Anti-glare improves contrast and colors, and filters out 99% of UV light from reaching your screen and reflecting.
Installs easily, removes cleanly without leaving residue.
Reduce expensive service calls or touch screen replacements due to screen damage.
|Autocaster Ultra/PC (Polymer Concrete) Continuous Casting System|
Developed specifically for Polymer Concrete manufacturing applications.
Replacing manual mixing with the Autocaster can significantly increase productivity, cut material costs and improve quality - all leading to increased profits for the manufacturer. Our many years of experience with continuous casting machines and cast polymer manufacturing equipment have led to innovative improvements that have been incorporated into the Autocaster continuous casting machine product line.
The base Autocaster Polymer Concrete machine includes:
Up to 100 pounds (44kg) per minute
Case hardened barrel
High efficiency, variable speed mixer
230 Volt AC TEFC or optional explosion proof
Mixing unit – 7.5 HP
Raw material feed units - 3/4 HP
Thermal pump unit - 1/2 HP
Three Filler (Metering) Hoppers standard
Inverter controlled adjustable output 4 - 100 pounds (10 - 44 kg)/min
Hopper capacity 4 cubic feet (0.113 cubic meters)
Integrated anti-bridging device for polymer concrete
Maximum 2500 centipoise promoted polyester resin
Overpressure sensor and bypass
Inverter controlled adjustable output 1.5 to 15 lbs/min.
Integrated recirculating thermal fluid based heat exchanger with 12kW heater
Gravity feed resin input
Precision gear pump
Recirculating system with dual electronic flow sensors and visual display
Inverter controlled adjustable output 10 to 300 grams/min.
Storage capacity of 5 gallons
One Base Color feed system standard (up to 3 additional can be added)
Precision gear pump
Uses liquid paste pigments up to 2500 centipoise
Inverter controlled adjustable output 0.1 to 1.0 lbs/min.
5 gallon storage tank
Dual cleaning system – internal and recirculating.
Air purge included
Internal cleaner 5 gallon storage, Recirculating cleaner 15 gallon storage
Recommended for use with DBE (Marblewash or equivalent)
Emergency flush valve
LCD Display and Keypad
Recipe presets with on-the-fly adjustments for resin, catalyst and output
Control panel mounted on adjustable arm
Integrated rate display and totalizers
Optional additional raw material feed systems
230/380/480 Volt, 3-Phase, 50/60 Hz, 80 amps max. Specify voltage.
24VDC control circuit
90 psi, 20 CFM
54” wide x 80” deep x 112” high (137.2cm x 203.2cm x 284.48cm)
3500 lb (depending on configuration)
Replacement Parts for Autocaster™ systems:
Available for Autocaster Ultra and Autocaster Economizer models!
Equipment Requirements: All Models should be hard-wired to an appropriate circuit by a qualified electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed to deem this equipment operational will be obtained by buyer at buyer’s expense.