Call us at (661) 257-4060

Products | Equipment | Blenders & Mixers | Vacuum Mixers | GS1700 Vacuum Mixer
Model GS1700 Vacuum Mixer Print
    GS1700_350w

    The GS1700 Vacuum Mixer is the latest mixer in the Gruber line.  The mixer features a powerful 3 horsepower motor and large capacity mixing vessel capable of mixing up to approximately 375 lbs. of solid surface matrix (approximately 28 gallons).

     

    • 375 lb (170 kg) capacity
    • 28 gallons (106 liters)

     

     

    The GS1700 Vacuum Mixer is the latest mixer in the Gruber line.  The mixer features:

    • a powerful 3 horsepower motor and large capacity mixing vessel capable of mixing up to approximately 375 lbs. (170 kg) of solid surface matrix (approximately 28 gallons or 106 liters).
    • Stainless steel mixing pot with a domed bottom and domed lid assembly.
    • The lid assembly is supported by a pneumatic cylinder that is used to raise and lower the assembly. When in the raised position, the lid assembly can be rotated away from the mixing pot to allow for unobstructed access.
    • Pot lifter and ring for use with a hoist and gantry to assist in the pouring of matrix.
    • Pnuematic boom and mixing arm that raises up and swings out of the way to give the larger pot more room to be lifted up with a bridge crane or gantry.
    • The heavy-duty contoured stainless steel mixing blade is attached to the lid assembly with a twist lock mechanism for quick blade removal and replacement.
    • Available with a 230/460 volt 3 phase 50/60 hertz mixing motor and a 115/230 volt single phase 50/60 hertz vacuum pump motor.

     

     

    Specifications

    Controls:
    - Integrated switch for motor on/off
    - Pneumatic control for raising/lowering lid assembly
    Electrical:
    - Mixing Motor - 50/60Hz 230/460V 3-Phase 10/5A @ 3HP
    - Vacuum Pump - 50/60Hz 115/230V 1-Phase 8/4A @ 1/2HP
    Air Requirements:
    - 5 CFM (141.58 L/min) @ 80 PSI (0.55 mpa) - clean and dry
    Mixing Vessel Drive:
    60 hertz 50 hertz
    Input speed: 1725 rpm 1425 rpm
    Reduction ratio: 30 to 1 30 to 1
    Output speed: 57.5 rpm 47.5 rpm
    Output torque: 1141 in. lb/992cm.kg 1087 in. lb./945cm.kg
    Oil capacity: 1qt./.946L 1qt./.946L

    Mixing Vessel:

    Material Bottom - 10ga. (3.4mm) stainless steel domed tank head.
    Side - 16ga. (1.6mm) stainless steel.
    Specifications Inside Dia. - 27” (685 mm)
    Inside depth - 23” (584 mm)
    Mixing/Total Capacity (Solid Surface)
    Approx. 375 lb (170kg)/130 qts.
    or 28 U.S. Gallons (approx. 106L)
    Shipping Weight 48 lb (22 kg)
    Shipping Dimensions 30” x 28” x 18” (762mm x 711mm x 457mm)

    Mixing Blade:

    Material: 1/2” (13 mm) x 3" (76mm) stainless steel flatbar contoured to mixing vessel with 1-5/8" (41mm) ID x 3/8" (10mm) wall stainless steel hub.
    Features: Quick release twist lock mechanism, polyethylene wipers
    Mixing Vessel Lid:
    Material: 10 gauge (3.4mm) stainless steel domed tank head.
    Features:

    - Utilizes a replaceable L-RTV rubber seal for pot rim (see optional accessories for replacement).

    - Includes replaceable bearing with vacuum seal.

    Vacuum Pump:
    Rotary vane, fan cooled and oil-less. Separate drive motor base mounted and coupled to pump. Includes muffler, filter, vacuum relief valve and vacuum gauge.

    Equipment Requirements:
    220V, 60hz and all 50hz models are equipped with a power chord only and would require a plug to match service outlet for testing purposes only. Mixers should be hardwired to an appropriate 30A circuit by a qualified electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed to deem this equipment operational will be obtained by buyer at buyers expense.

    Description and Order Number:

    GS1700 Vacuum Mixers*:
    GS1700 Vacuum Mixer, 60Hz, 3Ø (3-Phase), Complete w/ Vacuum Pump, Pot & Blade - #170136V*
    GS1700 Vacuum Mixer, 50Hz, 3Ø (3-Phase), Complete w/ Vacuum Pump, Pot & Blade - #170137V*
     
    Recommended Accessories:
    GS1700 Pot Lifter Assembly (Pot Lifter and Ring) - #170315
    Replacement/Additional GS1700 Stainless Steel Mixing Vessel only - #170310 (if you want an extra or additional mixing pot)
    GS1700 Pot Lifter Ring only - #170316 (one needed for each additional mixing pot if a Pot Lifter is used)

    Accessories:

    Vacuum Pump Assembly, GS1700/GS1800 - #162203
    Mixing Blade (Solid Surface) Stainless Steel GS1700 - #162248*
    Mixing Vessel only, Stainless Steel, GS1700 - #170310
    Pot Lifter Assembly (Pot Lifter and Ring), GS1700 - #170315
    Pot Lifter (No Ring), GS1700 - #170314
    Pot Lifter Ring only, GS1700 - #170316
    Poly Wiper Set, GS1700/GS1800 - #162205
    RTV-L Seal Kit, Vacuum Mixer - #0838194
    Sub Micro Air Filter, M-60 - #111095
    Replacement Filter, M-60 - #111096
     
    * A blade is available for cultured marble (#162204)

    Crating:
    Crate - GS1700 Vacuum Mixer - #CEGS1700
    Crate - GS1700 Vessel - #CEGS1700P