Call us at (661) 257-4060

Products | Equipment
Vibrators Print

Gruber offers three types of Vibrators for use with Vibe Tables, Casting Carts, etc - anywhere you want to apply vibration during a casting process:

  • Pneumatic Ball Type- two types
    • Table Vibrators
    • Replacement Filler Metering Hopper Ball Vibrators for select Gruber Automation Equipment products.
  • Electric
 


Pneumatic Ball Type Table Vibrators

vibrators120pGruber Pneumatic Ball Type Vibrators (sometimes referred to as Rotary Vibrators) are used in vibrate excess air out of marble matrix after pouring. These vibrators provide high-frequency vibration at an economical price. The only moving part is a high-grade chrome steel ball. Lubrication, while not required, extends the life of the units. Other uses these vibrators are for small hoppers, parts feeders, chutes and match plates. Air consumption for these units is moderate.
 
 
Vibrolator™ CV Series Ball Type Vibrators - These ball type vibrators are extra heavy-duty construction for operation in adverse conditions or water, heat, cold and grit. Vibration is controlled from a few cycles per minute to full speed by installation of a needle valve or pressure regulator. These vibrators assure satisfactory and efficient vibration for the toughest jobs.
VibrolatorCV-25-250
Model CV-25 - extra heavy-duty construction for operation in adverse conditions or water, heat, cold and grit. Vibration is controlled from a few cycles per minute to full speed by installation of a needle valve or pressure regulator. These vibrators assure satisfactory and efficient vibration for the toughest jobs.
 
Order Number 02012

VibrolatorCV-35-250

Model CV-35 - same as the CV-25, but produces up to 675 lbs force at 10,000 VPM.

Order Number 02013

 

DV-41 and DV-51 - These vibrators produce all directional vibration required for big jobs. Meets rugged requirements on extra large bins and hoppers.Both feature migratory, replaceable races.

DV-41-350

#41 - For very rigid hoppers or chutes, the #41 Vibrator is without equal. Ideal for larger weigh batchers in ready-mix plants.

#51 - This vibrator delivers more vibratory force at lower frequency. An effective unit for use on material that responds best to higher amplitudes and lower frequencies.

 

 


Pneumatic Ball Type Vibrators

for use with Gruber Filler Metering Hoppers on Gruber Automated Equipment products

The following Pneumatic Ball Type Vibrators are specifically for use with these Gruber products:

 
ABF-10-250

Replacement Air Operated Ball Vibrators

Replacement vibrator for use with all Gruber Filler Metering Hoppers used on Gruber Autocaster™ continuous casting systems and Batchmaster™ automated metering systems.

Note: Muffler (shown in foreground) is NOT included with Vibrator.

Air Operated Ball Vibrator (ABF-10) - #0832116

Replacement Air Operated Ball Vibrators

Replacement vibrator for use with all Gruber Filler Metering Hoppers used on Gruber Groundhopper™ metering and dispensing systems.

Note: Muffler is NOT included with Vibrator.

Air Operated Ball Vibrator (ABF-13) - #0831323

Replacement Air Operated Ball Vibrators

Note: Muffler is NOT included with Vibrator.

Air Operated Ball Vibrator (ABF-19) - #0832119

 


Electric Vibrators

 

 


Electric Vibrator (new type)
#08311741

 

 


Electric Vibrator (old type)
#08311740

 


Replacement Vibrator Bushings

These and other Vibe Table Bushings and Table Vibrator spare parts are available.

  • Bushing for new style Pneumatic Vibe Table (with tube frames).
  • Black Vibe Bushings Electric
  • Kit Stepped Vibe Bushing